KO-859

KO-859

Appointment: aluminum alloys, steel
Temperature resistance: °C 300
Packing:
10 kg
25 kg
Color:

This product is available tinting colors according to your desire. For details check with the Manager


!ATTENTION: Work only with LEGAL ENTITIES.

Price: 258.00 RUB/kg
The number:
Product successfully added!
To order, go to basket
Continue shopping

Description

Features

Application methods

Certificates (1)

The enamel KO-859 is intended to cover wires and cables, operated at temperature from -60oC to -250oC, staining of steel products and aluminum alloys exposed in the process of operation to temperatures up to 300 º C.

Use the enamel KO-859 as consumer goods for painting articles exposed to prolonged heat.

The enamel KO-859 is a variation of the enamel KO-84, manufactured in one color — silver.

SHELF LIFE

Warranty period of storage of the lacquer-basics – 6 months from date of manufacture.

STANDARD PRODUCTION

The production of enamel KO-859 is performed in accordance with GOST standards 22564-77.

Заключение от РЖД - АК НЕНС

1. Внешний вид пленки

После высыхания пленка эмали должна быть однородной, без оспин, потеков, сморщивания и посторонних включений

2. Цвет пленки эмали

 

Серебристый

3. Условная вязкость лака-основы при температуре (20,0±0,5) ºС, с, по вискозиметру типа ВЗ-246 (или ВЗ-4)с диаметром сопла 4 мм:

14-25

4. Массовая доля нелетучих веществ лака-основы, %:

24-27

5. Время высыхания до степени 3 при температуре (20±2) ºС, ч, не более:

2

6. Эластичность пленки эмали при изгибе, мм, не более

1

7. Твердость пленки, условные единицы, не менее:

по маятниковому прибору типа М-3 для эмалей:

0,50

8. Термостойкость пленки при температуре (300±10) ºС, ч, не менее

5

9. Стойкость пленки к статическому воздействию воды при температуре (20±2) ºС, ч, не менее

24

10. Стойкость пленки к статическому воздействию бензина (нефраса) при температуре (20±2)ºС, ч, не менее

2

Заключение от РЖД - АК НЕНС

Before application the surface is cleaned from mechanical impurities, water-soluble salts, grease, oil and degreased with the help of cloth soaked in aromatic solvent – solvent, xylene, acetone or any other.

It is important that the enamel was applied to a dry surface. Prepared to spray enamel is applied to the surface by pneumatic spraying, for coloring wires and cables is allowed to apply enamel by dipping.

The painting is done on a dry and degreased surface at ambient temperature and the substrate is from -30 º C to +40ºC.

Metal surfaces are painted in two cross-layers with intermediate drying between the layers “to touch” of 0.5-1.0 hours depending on the ambient temperature, final drying time 2 hours.

The thickness of the dried coating should be at least 25-35 microns.

Заключение от РЖД - АК НЕНС

Similar products:

Need help?
Professional help
If you have any difficulties, you can contact our specialists:

8 (800) 700-79-72
8 (800) 700-53-88
8 (835-33) 4-76-83

ICQ 281-034-662
ICQ 671-614-398
ICQ 656-767-981

X
X
X
Thanks for the request!
Your order,
expect a call specialist
Well