«ЦИНКОFULL»

«ЦИНКОFULL»

Appointment: aluminum alloys, magnesium alloys, copper and its alloys, metal, steel, titanium alloys , pipelines, ferrous metals
Temperature resistance: °C 200
Packing:
15 kg
30 kg
Color:
Price: 332 RUB/kg.
The number:
Product successfully added!
To order, go to basket
Continue shopping

Description

Features

Application methods

THE GROUND-ENAMEL "ЦИНКОFULL"

Temperature resistance: 300°C. Designation: steel.

Categories include coatings special purpose coatings for rolling stock/Railway structure, bridges, steel structures, machinery

ITEM DESCRIPTION

Zinc priming enamel "ЦинкоFull" is designed for corrosion protection of steel products and structures operated in atmospheric conditions of all macro-regions, types and categories of accommodation.

Also, coat-enamel can be used as a separate coating, priming, under coating materials in the integrated protection systems, for repair of zinc metal coatings.

This enamel is of two types:

Heat-resistant priming enamel designed for corrosion protection of steel products and structures, operated in atmospheric conditions and has a thermal stability up to 3500C.

Epoksiefirnye the ground-enamel, used for corrosion protection of steel structures, operated in atmospheric conditions of all macro-regions, types and categories of accommodation.

SHELF LIFE

At observance of conditions of transportation and storage, the shelf life of the ground-enamel "Цинкоfull" is 6 months from the date of manufacture.

STANDARD PRODUCTION

The ground-enamel "ЦинкоFull"is made in accordance with the 2312-024-24358611-2013.

Доставка по СНГ и России

Показатели покрытия

Цвет

Серый, оттенок не нормируется

Внешний вид покрытия

Гладкая, матовая

Адгезия пленки, баллы, не более

1

Эластичность плёнки при изгибе, мм, не более

1

Прочность пленки при ударе на приборе У-1А, см, не менее

50

Интервал рабочих температур

- 60оС до + 200оС

Показатели грунт-эмали

Условная вязкость при температуре (20,0±2)°С по ВЗ-246 (4мм) ,с, не менее

40

Массовая доля нелетучих веществ, %,  не менее

60

Время высыхания до степени 3 при температуре

( 20,0±2)0, ч, не более

 

1

Температурный диапазон нанесения

От минус 15оС до + 50оС

Разбавитель

Ксилол, толуол

Доставка по СНГ и России

Before application of priming enamel "ЦинкоFull" previously untreated surface must be cleaned of rust by the method of dry abrasive blast cleaning mechanical (using electric and pneumocephaly machines) or manually (with the help of the sandpaper, metal brushes, scrapers for hard to reach places). Then remove dust from surface using air blowing or bristle brushes and soft cloth, lint-free surface, then degreased with organic solvents (xylene, solvent or other suitable solvents), and degreased. If the cleaning of the surface produced by abrasive blast method, then degrease the surface optional.

Before application of priming enamel "ЦинкоFull" thoroughly mixed until complete removal of the sludge and, if necessary, dilute to working viscosity with xylene or toluene. Recommended working viscosity for application by brush or roller – 35, a pneumatic spray – 17-22 with airless spray – 40 C.

The ground-enamel is applied to the surface at ambient temperature from-150C to 400C and a relative humidity of above 80%.

The ground-enamel "ЦинкоFull" is applied to the surface by pneumatic or airless spraying, by brush or roller in 1-2 layers, Each subsequent layer is applied not earlier than 1 hour after the previous at an ambient temperature of 20°C, at lower temperatures the dwell time of the coating it is recommended to increase.

Drying time to degree 3 at a temperature of 200C is 1-2 hours. Final drying at a temperature of 200C (degree 7) – not less than 24 hours.

Theoretical consumption of the ground-enamel "ЦинкоFull" on a single-layer coating is 22-30 µm 180-320g/m2. The practical consumption depends on the application method, the degree of surface preparation and configuration of the product.

The exposure time of the coating prior to operation – at least 7 days. Transportation of products can be produced not earlier than three days after application depending on temperature regime of drying.

Доставка по СНГ и России

Similar products:

Need help?
Professional help
If you have any difficulties, you can contact our specialists:

8 (800) 700-79-72
8 (800) 700-53-88
8 (835-33) 4-76-83

ICQ 281-034-662
ICQ 671-614-398
ICQ 656-767-981

X
X
X
Thanks for the request!
Your order,
expect a call specialist
Well