The facade enamel KO-168

The facade enamel KO-168

Appointment: concrete, concrete/reinforced concrete
Temperature resistance: °C 150
Surface: building surface
Packing:
10 kg
25 kg
Color:
This product is available tinting colors according to your desire. For details check with the Manager


!ATTENTION: Work only with LEGAL ENTITIES.

Price: 143 RUB/kg.
The number:
Product successfully added!
To order, go to basket
Continue shopping

Description

Features

Application methods

It has a high resistance to UV rays. The coating on the basis of the enamel is water-, frost- and moisture proof. It keeps a good vapor and air permeability

Заключение от РЖД - АК НЕНС

Наименование показателей

Норма ТУ 6-02-900-74

Внешний вид пленки эмали

После высыхания эмаль должна быть  однородной, без морщин, оспин и посторонних включений

Условная вязкость по вискозиметру типа ВЗ-246 с диаметром сопла 4 мм при темп. (20±2)0С, с

 

20-45

Массовая доля нелетучих веществ, %, не менее

60

Время высыхания до степени 3, при температуре  (20±2)0С, ч., не более   

 

24

Степень перетира, мкм, не более

60

Эластичность пленки при изгибе, мм, не более

3

Твердость пленки по маятниковому прибору типа ТМЛ (маятник А), усл. ед., не менее

0,25

Стойкость пленки эмали к статическому воздействию воды при температуре (20±2)0С, ч., не менее

 

24

Укрывистость высушенной пленки эмали, г/см2, не более:

белая, слоновая кость;

желтая, красная, голубая, салатная;

коричневая, синяя, зеленая;

черная.

 

110

100

80

60

Заключение от РЖД - АК НЕНС

The painted surface must be cleaned from mechanical impurities, water-soluble salts, greases and oils. Degreasing is done with a rag soaked with solvent, xylene, toluene or other aromatic solvents.

The surface before colouring should be dry and clean.

Enamel КО-168 was originally produced ready-to-eat. However, in the case of a business need to dilute paints and bring to working viscosity use xylene or toluene. The degree of dilution of the enamel to working viscosity (ВЗ-246 with nozzle diameter 4 mm) 15 u.s. may reach 30-80%.

Before applying the enamel must be thoroughly mixed until complete disappearance of the precipitate and then measure the viscosity.

Prepared to spray enamel can be applied with paint gun (pneumatic or airless), rolling, brushing, dipping. When spraying nozzle diameter must be -2.5 1.8 mm. The distance from the nozzle kraskoraspylitelja to painted surface should be between 200-300 mm depending on the air pressure and the diameter of the nozzle.

Colouring is done on dry, degreased surface at the ambient temperature and underlays from -30° to +40° c.

When coating silver color in an aggressive Wednesday (mineral oil, petrol, saline mist) termozakalka cover at a temperature of 250-300° c for 15-20 minutes.

The thickness of the dried coating on the surfaces, operated in atmospheric conditions of high humidity and temperatures up to 100°C, 50-60 µm with a total enamel consumption 200-300 g/m2.

Заключение от РЖД - АК НЕНС

Similar products:

Need help?
Professional help
If you have any difficulties, you can contact our specialists:

8 (800) 700-79-72
8 (800) 700-53-88
8 (835-33) 4-76-83

ICQ 281-034-662
ICQ 671-614-398
ICQ 656-767-981

X
X
X
Thanks for the request!
Your order,
expect a call specialist
Well