SPECKOR 3 in 1

SPECKOR 3 in 1

Appointment: metal
Packing:
10 kg
25 kg
Color:
This product is available tinting colors according to your desire. For details check with the Manager


!ATTENTION: Work only with LEGAL ENTITIES.

Price: 186 RUB/kg.
The number:
Product successfully added!
To order, go to basket
Continue shopping

Description

Features

Video (1)

The ground-enamel "special Correspondent" anti-rust 3 in 1 is designed to improve the corrosion resistance of the coating and increase adhesion to the painted surface. The unique formula of the ground-enamel allows you to perform the function of an integrated system of coatings:

Corrosion inhibitor — converts and stops rust, allowing you to strike the ground-enamel on a corroded surface;
The primer evens out the surface
Protective enamel – gives decorative properties
The coating on the basis of priming enamel is resistant to UV rays, hydrophobic, has moisture resistance and frost resistance. Can be used to protect any metal surfaces, operated in all climatic zones in atmospheric conditions and indoors, and in conditions of high humidity and temperature changes from -600C to +1500С.

The ground-enamel "special Correspondent" is available in three types: polyplanar, matte and with hammer effect:

semi-gloss is designed for corrosion protection of metal products of various shapes and sizes.
matte is designed for corrosion protection of metal products obtained by forging, stamping, casting iron, iron, steel, non-ferrous metals and their alloys ( monuments, fireplaces, fences, doors) and other metal products of various shapes and sizes.
with hammer effect, designed to obtain self-protective and decorative patterned coating on a clean or partially corrode metal surfaces. Thanks to the excellent hammer effect hiding the defects of painted products
Available in different colors in accordance with RAL catalogue.

Доставка по СНГ и России

Наименование показателя

Значение

Метод испытания

1.Цвет пленки эмали

Любой в соответствии с каталогом RAL

По ГОСТ 29319-92 и п.5.3 настоящих ТУ

2. Внешний вид пленки

После высыхания пленка должна быть однородной, без расслаивания, оспин, потеков, морщин и посторонних включений.

по ГОСТ 29319-92 и п.5.3 настоящих ТУ

3. Условная вязкость при (20,0±0,5)0С по вискозиметру ВЗ-246 с диаметром сопла 4 мм, с, не менее

 

60

По ГОСТ 8420-74

4. Массовая доля нелетучих веществ, %, не менее

45

По ГОСТ 17537-72 и п. 5.4 настоящих ТУ

5. Степень перетира мкм, не более

60

По ГОСТ 6589-74, способ А

6. Время высыхания до степени 3 при температуре (20±2)0С, ч, не более

2

По ГОСТ 19007-73

7.Эластичность пленки при изгибе, мм, не более

1

По ГОСТ 6806-73

8. Прочность покрытия при ударе на приборе У-2М, см, не менее

 

50

По ГОСТУ 4765-73

9. Адгезия покрытия, баллы, не более

1

По ГОСТ 15140-78, раздел 4

10. Стойкость пленки к статическому воздействию воды при температуре (20±2)0С, ч, не менее

72

По ГОСТ 9.403-80 и 5.5 настоящих ТУ

Доставка по СНГ и России

Similar products:

Need help?
Professional help
If you have any difficulties, you can contact our specialists:

8 (800) 700-79-72
8 (800) 700-53-88
8 (835-33) 4-76-83

ICQ 281-034-662
ICQ 671-614-398
ICQ 656-767-981

X
X
X
Thanks for the request!
Your order,
expect a call specialist
Well