AF «NENS»

AF «NENS»

Appointment: metal, machinery
Packing:
10 kg
25 kg
Color:
This product is available tinting colors according to your desire. For details check with the Manager


!ATTENTION: Work only with LEGAL ENTITIES.

Price: 153 RUB/kg.
The number:
Product successfully added!
To order, go to basket
Continue shopping

Description

Features

Application methods

Video (1)

Certificates (3)

The ground-enamel alkyd phenolic modified "NANCE" is designed for priming metal surfaces, exposed to atmospheric influences for subsequent painting alkyd enamels or temporary protection of a surface from external influences, as well as to create protective and decorative coatings of metal parts of vehicles, agricultural machinery, garages, wrought iron furniture, window guards, ornamental fences, etc., combines the corrosion resistant primer and decorative-protective properties of the enamel.

SHELF LIFE

Warranty period of storage — 12 months from date of manufacture.

STANDARD PRODUCTION

The ground-enamel alkyd phenolic "NANCE" is made on the basis THAT 2312-011-24358611-2011.

Доставка по СНГ и России

Наименование показателя

Норма по ТУ

1.Цвет пленки эмали

Должен находиться в пределах допускаемых отклонений, установленных контрольными образцами цвета, картотекой цвета RAL

2. Внешний вид

После высыхания пленка должна быть глад-кой, однородной, без расслаивания , оспин, потеков, морщин и посторонних включений

3. Условная вязкость при температуре (20,0±0,5)°С по вискозиметру ВЗ-246 с диаметром сопла 4мм, с

20-140

4. Массовая доля нелетучих веществ, % не менее

45

5. Степень перетира, мкм, не более

35

6. Время высыхания до степени 3, ч, не более
при температуре (20,0±2 )0С, ч
при температуре (80,0+2 )0С, ч

 

4

0,3

7. Эластичность плёнки при изгибе, мм, не более

1

8. Прочность пленки при ударе на приборе У-2М, см, не менее

50

9. Твёрдость плёнки по маятниковому прибору, не менее:

типа ТМЛ, маятник А, отн. ед.

или
типа М-3, усл.ед.

 

 

0,25

 

0,40

10. Адгезия покрытия, баллы, не более

1

11. Укрывистость высушенной плёнки,
г/м2 не более

120

12. Стойкость пленки при температуре (20±2)°С к статическому
воздействию, ч, не менее :
воды

минерального масла марок И-12А, И-50А

бензина

 

 

 

72

48

2

Доставка по СНГ и России

Before applying the soil-the enamel surface must be degreased by wiping with solvent, xylene, acetone or other aromatic solvents.

The surface must be clean and dry without dirt, cleaned of old loosely held on the coating. Apply the ground-enamel on primed or previously painted surfaces as other types of paints and enamels (GF, PF, MA, EP, etc.) provided their full and final polymerization

Before applying the primer, thoroughly mix the enamel and, if necessary, dilute to working viscosity 28-30 seconds by the viscometer VZ-246 with a nozzle diameter of 4 mm xylene oil (GOST 9410-78) or solvent (GOST 10214-78).

The ground-enamel AF "NANCE" is applied to the surface at ambient temperature from 5 to 350C and relative humidity above 80%.

Prepared to spray primer-enamel is applied to the surface by means of pneumatic and airless spraying, spraying in the electrostatic field, the jet stream pouring, brush or roller in 1-2 layers method "wet on wet". Time intermediate drying 10-15 min. For painting in electrostatic field, the ground-enamel was diluted with thinner ER-4B.

The recommended coating thickness of 30-40 microns. Consumption per layer should not exceed 100 g/m2. The practical consumption depends on the application method, the degree of surface preparation and configuration of the product.

Доставка по СНГ и России

Similar products:

Need help?
Professional help
If you have any difficulties, you can contact our specialists:

8 (800) 700-79-72
8 (800) 700-53-88
8 (835-33) 4-76-83

ICQ 281-034-662
ICQ 671-614-398
ICQ 656-767-981

X
X
X
Thanks for the request!
Your order,
expect a call specialist
Well